You might also like

IN

BISSELL Hand Vacuum Assembly - Black for Select Stick Vacuums 1627422

Hand Vac Assembly in Black for Select BISSELL Stick Vacuums including BISSELL PowerEdge Cordless Stick Vac, Series 2900. Hand Vacuum Assembly - Black for Select Stick Vacuums 1627422

Brand: BISSELLCustom Shipping

$139.56

IN

BISSELL Hose Assembly for Select Vacuums 1635628

Hose Assembly for Select BISSELL Upright Vacuum Cleaners. Click on "view products" to see if this hose fits your machine. To attach the hose, follow these instructions for assembly: Attach the Handle and Wand to the vacuum base. Attach the hose to wand and twist clockwise to lock into place. Attach hose to back of vacuum and twist clockwise to lock into place. Attach hose clip to the body of the vacuum by sliding up until it clicks into place. Remove hose clip for extended cleaning reach when in use. The hose should sit on the vacuum without any twists. Hose Assembly for Select Vacuums 1635628

Brand: BISSELLCustom Shipping

$29.19

IN

BISSELL Foot Hose Assembly for Select Vacuums 1608222

Foot Hose Assembly includes the Foot Hose, Cuffs and 1 screw. Fits Select Upright Vacuum Cleaners, including Series 1797. Foot Hose Assembly for Select Vacuums 1608222

Brand: BISSELLCustom Shipping

$22.72

IN

BISSELL Pre-Motor Foam Filter for Select Canister Vacuums 1613062

Pre-Motor Foam Filter for Zing Bagged Canister Vacuum - Series 2154. This filter is washable. Wash in warm water and mild detergent. Make sure the filter is completely dry before putting it back in the machine. It is recommended to change filters every 3 to 6 months depending on use and how often it is cleaned. Clean filters will keep the suction power of your machine at optimal levels. Dirty filters will restrict the air flow and greatly reduce suction power. Pre-Motor Foam Filter for Select Canister Vacuums 1613062

Brand: BISSELLCustom Shipping

$21.95

IN

BISSELL BOLT Handle & Body Assembly Black for Model 1313V 1611014

Handle and Body Assembly in Black for BOLT Stick Vacuum, Model 1313V. BOLT Handle & Body Assembly Black for Model 1313V 1611014

Brand: BISSELLCustom Shipping

$48.29

IN

BISSELL Triple Action Brush Roll for Select Vacuums 1610230

Brush Roll fits the PowerLifter & PowerLifter Pet Rewind Upright Vacuum Cleaners - Series 1790, 1792 & 1793. Triple Action Brush Roll for Select Vacuums 1610230

Brand: BISSELLCustom Shipping

$27.49

IN

BISSELL Separator Assembly w/ Filter - Pet Hair Eraser Hand Vacuum 1608653

NOTE: The Mesh Screen DOES NOT come with this part Only the filter will arrive with order! Mesh Screen (1608654) needs to be ordered separately. This separator Assembly includes the filter for the Pet Hair Eraser Cordless Hand Vacuum, series 1782. The key to maximum performance is having a clean filter. Cleaning after each use will help your vacuum operate at peak efficiency. Turn the power OFF Remove the dirt cup as directed To remove filter cup from dirt cup, grasp filter tabs and lift up to remove the washable filter cup from the dirt cup. Grip the filter cup and turn counterclockwise and lift down to remove filter from filter cup Tap firmly against the inside of a waste container, removing any visible dirt. Replace filter back into the filter cup then turn clockwise to lock into place. Attach filter cup back into the dirt cup and attach to hand vacuum until it snaps securely in place. Separator Assembly w/ Filter - Pet Hair Eraser Hand Vacuum 1608653

Brand: BISSELLCustom Shipping

$25.55

IN

BISSELL Carriage Assembly for Select Upright Vacuums 1640805

Carriage Assembly for select BISSELL Upright Vacuum Cleaners. Click on "view products" to ensure this fits your machine. Carriage Assembly for Select Upright Vacuums 1640805

Brand: BISSELLCustom Shipping

$23.4