Differential Cover Dana M275 14 Bolts for 2017+ Ford F250 F350 SPELAB
Differential Cover Dana M275 10.8″ 14 Bolts Rear Axle For 2017+ Ford F250 F350 Super Duty SPELAB What is the one part that takes abuse off-road first? Differential covers are on the axle lower to the ground. Factory diff covers are usually thin and unable to withstand much abuse. Failures occur from punctures and “peeling up” the edge of the cover. Spelab offers a Heavy Duty Diff Cover for the Ford M275 Super Duty 14 Bolt Rear axle on year models 2017+. Function: Protects the differential, seals the differential, stores differential fluid. Fitment: 2017,2018,2019,2020,2021,2022,2023,2024,2025 Ford F250/ F350 Super Duty SRW Note: The year and model may not guarantee compatibility. Please confirm whether the axle is DANA M275 10.8″ 14 Bolts. Innovative points: 1. The external heat sink design increases the contact area between the differential cover and the surrounding air, enhancing heat dissipation performance.2. The internal diversion groove design aligns with the direction of liquid flow in the differential gear's rotation, ensuring maximum flow rate for better lubrication.3. The use of aluminum alloy material significantly improves cooling performance compared to the commonly used iron material. When comparing billet to cast products, billet items are often considered more durable and built for long-lasting performance.4. An external observation mirror with a floating ball is used to monitor the oil level. Traditional observation mirrors in the market may darken over time, reducing visibility. Therefore, the floating ball allows us to monitor the oil level even if the mirror darkens. 5. The outside with black wrinkle paint providing rust resistance. Specifications： Learn more diff cover 14 bolt 2017+ Ford F250 F350 with Dana M275 FAQs Q1: How to plug a tiny hole on my truck differential?A1: To plug a tiny hole on your truck differential, clean the area thoroughly, apply a high-quality epoxy or JB Weld, and allow it to cure as per the manufacturer's instructions. For a more permanent solution, consider welding the hole shut. Q2: Is it safe to work under a car on jack stands?A2: Yes, it is safe to work under a car on jack stands if they are properly rated for your vehicle's weight and used on a flat, stable surface. Always use multiple jack stands and never rely solely on a hydraulic jack. Q3: What causes the rear differential to leak?A3: Rear differential leaks can be caused by worn seals, damaged gaskets, loose bolts, or cracks in the differential cover. Regular maintenance and inspection can help prevent leaks. Q4: How tight should a pinion nut be?A4: The pinion nut should be tightened to the manufacturer's specified torque, typically measured in foot-pounds (ft-lbs). Over-tightening or under-tightening can lead to differential damage or failure. Q5: How to identify a Dana 70 rear axle?A5: A Dana 70 rear axle can be identified by checking the axle's BOM (Bill of Materials) number, usually stamped on the axle tube. You can also measure the...
Brand: SPELABCustom Shipping
